RUBBER ACCESSORIES WAKEFIELD (F1B) PROP UNITS & ACCESSORIES
The prop units are now out of production. However I do have a quantity of spare parts still available as follows: Nose ring £2.00; shaft £1.90; stop pin and clip £1.30; Montreal pin and clip £1.30; rear hook £1.90; front nut £1.25; roots £0.90 per pair; Flexible spinners red, black, white, yellow and green, £0.49; Springs set of 2, £0.30; set of bearings £4.00. There are some part finished units left that with some work could be finished £15.00 for a set of parts. Adjustable pitch hubs for use separately or with prop hub, £4.50 per pair. All item plus postage.
JOURNAL RACES
Journal races for F1B prop units or similar use. 3/8" OD for 1/8" shaft, 5/32" deep with flanges deep grooved. £4.00 for a pair of bearings, plus post.
CHINESE WAKEFIELD (F1B) PROP UNITS
Fully machined from aluminium. Montreal stop, front of the unit pulls forward for release. 30 mm outside diameter. The spinners are no longer supplied. Weight 30 gms. roots are a hollow cuff to take prop blades. Rubber attached to integral bobbin. £20.00 plus post. Image
FREE FLIGHT NEWS (FFN) (F1B) PROP UNITS
All units now sold. However There are a few spare parts left in stock, ask for details and prices.
F1G PROP UNIT, MOTOR TUBE, BOOM & COUPLER COMPLETE (BUKIN)
Standard prop unit and nose ring - Very neat ultra light with spinner and ball race mounted shaft, complete with nose ring, clip on rubber bobbin and prop hangers. £55.00 plus post. Spare nose rings £8.00 plus post. Image Image
DPR prop unit and nose ring - Very neat ultra light with spinner and ball race mounted shaft, complete with nose ring, clip on rubber bobbin and prop hangers. £70.00 plus post.
Bobbins - £8.00 plus post.
Rear motor pegs - £3.00 plus post.
Prop hanger with root - £18.00 per set plus post
Prop root - £3.50 per set plus post.
Prop blades - £25.00 per set plus post.
Motor tube - 2 layers of 93 gm Kevlar cloth, hot cured epoxy matrix - 400 mm x 20.5 mm to 18.5 mm dia, weight 7 gms, £20 plus post.Boom (carbon fibre/alloy)- 12 mm to 5 mm x 740, 5.0 gms - £21.00 plus post.
Boom (carbon fibre cloth)- 11.5 mm to 4.5 mm x 790, 6.0 gms - £21.00 plus post.
Connector - two piece alloy coupler for motor tube/boom - £16.00 plus post.Complete F1G fuselage -mptor tube boom and connector only - £55.00 plus post. Advise choice of boom required.
F1B MOTOR TUBE, BOOM & COUPLER COMPLETE (BUKIN,VIVCHAR)
Motor tube - 3 layers of 93 gm Kevlar cloth, hot cured epoxy matrix - 520 mm x 29.0 mm to 26.0 mm dia, weight 22 gms, £25 plus post.
Boom – (carbon fibre/alloy) 12.0 mm to 5.0 mm x 740, 7.0 gms - £23.00 plus post.
Boom – (carbon fibre cloth) 11.5 mm to 5.5 mm x 760, 7.5 gms - £23.00 plus post.
Connector - two piece alloy coupler for motor tube/boom.- £25.00 plus post.Complete F1B fuselage - £70.00 plus post. Advise choice of boom required.
This fuselage can be used as an upgrade for the Prima kit
The complete fuselages, F1B and F1G, are dispatched in plastic tubes. The return of these tubes, were practical, for recycling would be appreciated.
WING JOINERS
Full details see glider accessories page.
F1B 3.0 mm x 90 mm £5.00 each plus post.
REAR MOTOR PEGS
Hollow alloy pegs 3/16" OD with screw end, to fit 28 mm dia. fuselage will take 12 swg stooge pin "neat" and "secure" £1.90 each, plus post.
Heavy duty version of the above 1/4" OD with screw end, two sizes to fit 28 mm and 30 mm dia. fuselage 10 swg stooge pin £2.10 plus post.
THRUST RACES
3 sizes : - 14 SWG (2 mm), 16 SWG and 3/32" brass housing with steel balls £3.50 plus post.
THRUST WASHERS (PRESSED STEEL)
16 SWG £0.75 plus post.
BRASS BUSHES
14, 16, 18 SWG £0.85 each, plus post .
One piece aluminium, very thin wall, very light.
1) hole size 1/4", 7/8" dia. 1/4" wide £0.85 plus post.
2) hole size 5/32", 3/4" dia. 1/4" wide £085 plus post.
3) hole size 5/32", 3/4" dia. 3/8" wide £0.85 plus post.
4) hole size 1/4", 3/4" dia. 3/8" wide £0.85 plus post.
Delrin, very light.
1) hole size 1/8", 12mm dia 1/8" wide £0.60 each plus post.
2) hole size 1/8", 15mm dia 1/8" wide £0.70 each plus post.
3) hole size 3/16", 18mm dia 3/16" wide £0.80 each plus post.
4) hole size 3/16", 20mm dia 3/16" wide £0.90 each plus post.
5) hole size 1/4", 20mm dia 1/4" wide £0.90 each plus post.
6) hole size 1/4", 25mm dia 1/4" wide £1.00 each plus post.
Use with alloy tube or pultruded carbon fibre tube see rear motor peg material below.
FREE FLIGHT NEWS (FFN) RUBBER BOBBINS
One piece aluminium, thin wall tube with ends machined to clip into a winding tube. OD 1/4" x 1" long will take 5/32" motor peg. £0.10 each plus post.
REAR MOTOR PEG MATERIAL
HE30TF alloy tube 22 swg wall thickness.
3/16" OD - 50p per foot plus post.
1/4" OD - 50p per foot plus post.
5/16" OD - 55p per foot plus post.
The tubes can be fitted together to make rear motor peg assemblies for rubber models or use in with bobbins.
Pultruded carbon fibre tube
0.125" (3.18mm) OD x 0.070" (1.78mm) ID x 36" (915mm) - £3.00 plus post.
0.196" (4.98mm) OD x 0.120" (3.00mm) ID x 36" (915mm) - £3.00 plus post.
LIGHTWEIGHT CARBON FIBRE TUBES
Lightweight carbon fibre motor tubes. Special tubes from Mike Francies for lightweight rubber models
16swg mini (P30) ) £0.35, plus post. Sheathing not required.
BMFA Rubber 9/8" (28.2mm) dia x 32" (812mm) 17.0 grammes £28.00 Plus post BMFA Rubber 1.0" (15.5mm) dia x 32" (812mm) 15.5 grammes £28.00 Plus post P30 7/8" (13.6mm) dia x 32" (812mm) 13.5 grammes £28.00 Plus post P30 3/4" (11.7mm) dia x 32" (812mm) 11.5 grammes £28.00 Plus post
16swg small (Cd'h), £0.40 plus post. Plastic tube for sheathing £1.50 per metre plus post.
16 swg standard (open and F1B) £0.45 plus post. Plastic tube for sheathing £1.50 per metre plus post.
14 swg heavy duty (open and F1B) £0.50, plus post. Plastic tube for sheathing £1.50 per metre plus post.
240 mm £1.50, 200 mm £1.25, 150 mm £0.75. Very thin light blades that can be trimmed to the desired shape. The 240mm prop is the P-30 propeller of choice! All plus post. For complete units see SPENCER WILLIS items below.
“Butterfly” indoor model propeller complete with front and rear mounts £2.00 plus post. Propellers only £1.50 plus post
SPENCER WILLISPROP UNITS
Spare propunits for Spencer's P20 and P30. These units feature IGRA propellers. 8" P20 £3.00 and 10" P30 £3.00 both plus post.
HAND CARVED PROPELLERS FOR SPENCER WILLIS KITS
LANZO DUPLEX complete nose unit £28.00 propeller only £30.00 plus postYANKEE IV complete nose unit £33.00 propeller only £25.00 plus post
1937 KORDA CLASS C complete nose unit £25.00 propeller only £22.00 plus post
BUCKERIDGE LIGHTWEIGHT DURATION complete nose unit £26.00 propeller only £23.00 plus post
MINI-MANX TAILLESS (18” x 22.24”-21.8”) complete nose unit £28.00 propeller only £25.00 plus post
For details of the kits see kits page
HAND CARVED PROPELLERS OTHER MODELS
KK SENATOR complete nose unit £23.00 propeller only £19.00 plus post
KK GYPSY complete nose unit £29.00 propeller only £24.00 plus post.
HAND CARVED CUSTOM MADE PROPELLERS
Custom made propellers can be made for other rubber-powered models, enquire regarding details etc. click here to send your e-mail with details of your requirements.
TORQUE METERS3 Sizes for :– P20/P30 - Mini vintage/Coupe - Vintage/Large rubber – all 3 sizes £11.50 each plus postage
BMFA EDUCATION PROGRAMME
SPARE PROPELLER UNITS - Complete - fits all BMFA models, red 5.5" or black 6" either propeller. £0.50 plus post. See kits page For details of the models
For the full range of Peck rubber model precision products see the Peck page.
KEIL KRAFT
5” plastic propellers to suit flying scale series of models £0.30 plus post.
12” plastic propellers to suit larger models £1.00 plus post
¾” and 1” plastic wheels to suit flying scale series of models £0.25 per pair plus postage
KP AERO MODELS PRODUCTS92 ADJUSTABLE NOSE BUTTON. Plastic nose button for simple thrust line adjustment. Double pack £3.06 plus post. Image
SIMPLE NOSE BUTTON. (94) Large or (95) small. Pack of 10 either size £1.02 plus post.
BALL BEARING NOSE BUTTON. Plastic button with built in thrust race. 3 sizes.
(96) 1.0mm, (97)1.2mm, (98)1.6mm single £1.53 each plus post Image
(99) 1.0mm, (100) 1.2mm, (101) 1.6mm pack of 4 £5.11 plus post ImageINDOOR RUBBER WINDER (54) 5:1, (55) 10:1 and (56) 15:1 ratio winders (specify preference) - £8.12 each, plus post. Image See details of counter below.
INDOOR RUBBER WINDER COUNTER A small electronic counter produced by Tony Elliott that is easily fitted K&P winder and is programmable to all of the 3 ratios. Complete kit £5.00 plus post. Image Image Image
LIGHTWEIGHT PLASTIC WHEELS (80) 10mm (3/8") dia pack of 10 £1.02 (81) 22 mm (7/8") dia £0.97 per pair (82) 25 mm (1") dia £1.02 per pair (83) 32 mm (1 1/4") dia £1.23 per pair . All sizes plus post.
912 10-4 WINDER 10:1 & 4:1 combined winder for medium size outdoor models. Made from nylon reinforced plastic, ball races support the moving parts, spade handle and spring loaded motor attachment, weight 305 grams Now supplied complete with an analog counter £66.38 plus post. Image Image Image The (911)counter is also available as a separate item at £15.32 plus post.
For further detail see KP Aero site
GIZMOGEEZER PRODUCTS
For the full range of GizmoGeezer rubber model precision products see the GizmoGeezer page.
12.5mm long x 3.4mm dia, 0.3mm wire. For prop stops, light or medium compression. £1.00 for 10 either weight plus post. Click here to download a Microsoft Word copy of the spring specification.
OTHER ITEMS
In addition check the generic pages for materials, components, timers, plans, kits and equipment etc.
See Publications - "Rubber Model Propellers", for help in using the items.
All prices plus postage and packing see Post and Packing
TOP OF PAGE
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}